NEW COMPACT DOUBLE-SIDED
TAPE DISPENSER
Automatically Cuts Tape to
Size, Removes Backing Liner
CLEVELAND, OH—April 21, 2006— A new automated tape dispenser has been
introduced by ASG, a division of Jergens, Inc. In addition to cutting tape to
the desired size, the new EZ-7000 RP dispenser can remove the back liner from
the tape, delivering a ready-to-apply piece to the operator.
The new EZ-7000 RP tape dispenser is a compact 11.5 x 14.0 x 21.5 cm (4 1/2 x 5
1/2 x 8 1/2" ) but built for industrial use. Using it to automate the
dispensing process will increase productivity and improve product appearance
while reducing waste and operator fatigue.
The EZ-7000 RP has four operating modes, making it exceptionally versatile.
When used in the automatic mode, whenever a piece of tape is pulled from the
dispenser, it feeds and cuts the next piece. In manual mode, the dispenser
presents and cuts a piece of tape each time a button is pushed. A preset mode
allows cutting of preselected number of pieces; machine stops and buzzer sounds
when done. Loop mode allows continuous dispensing and cutting of non-adhesive
material up to designated number. An LED provides dispenser status.
Most tape or film can be dispensed with the EZ-7000 RP. The dispenser will cut
very short pieces, starting at 4mm and up to a maximum of 999mm lengths. In
addition to double-sided tapes, materials that are accepted include: craft,
gummed, vinyl, cotton cloth, double face, paper, Kapton®, glass cloth, and many
others. Designed to accept all tape core sizes, the dispenser accommodates tape
rolls with an outside diameter of less than 30mm.
ASG is located at 15700 South Waterloo Road, Cleveland, OH 44110-3898.
Phone: (216) 486-6163
Fax: (216)-481-4519
E-mail: asginfo@asg-jergens.com
Web: www.asg-jergens.com
Send Inquiries to ASG Customer Service.
|